12V 460Ah V2 Elite Series LiFePO4 Battery (5.89kWh)
$2,199.00
$0.00( / )
Tax included.
12V 460Ah V2 Elite Series LiFePO4 Battery (5.89kWh): Massive deep-cycle energy storage engineered into a standard Group 8D Size footprint (20.9" x 8.7" x 12.1")—delivering maximum off-grid power for RVs and marine house banks. Native VICTRON Communications: Seamlessly communicate real-time battery data with your GX devices out-of-the-box. Easily scale your...
Categories:
){kind=link}
- 12V 460Ah V2 Elite Series LiFePO4 Battery (5.89kWh): Massive deep-cycle energy storage engineered into a standard Group 8D Size footprint (20.9" x 8.7" x 12.1")—delivering maximum off-grid power for RVs and marine house banks.
- Native VICTRON Communications: Seamlessly communicate real-time battery data with your GX devices out-of-the-box. Easily scale your power by safely connecting up to 16 batteries in parallel on a single system.
- Elite Performance Specifications: Effortlessly handle heavy power spikes and large inverters with a robust 230A Max Continuous Discharge (500A 30s peak) and an ultra-fast 230A Max Continuous Charge rate.
- BLUETOOTH Battery Intelligence: Monitor real-time state of charge, view cell voltages, and track cycle history directly from your iOS or Android app. (Bonus: External Power Button & Battery Gauge INCLUDED!).
- HEATED For Extreme Climates: Built-in internal heating allows for safe, automatic charging even in freezing, below 0°C conditions.
- IP67 Rated & WATERPROOF: Fully sealed, dust-tight construction rigorously tested to survive and thrive in harsh marine and outdoor environments.
- Advanced Smart BMS & Premium Certifications: Fully integrated Smart BMS protects against over/under charging, shorts, and extreme temps. Engineered for total peace of mind with UL1973, UL1642, U9540A, and IEC 62619:2022 Certified Cells and a UL60691 Internal Fuse.
- 3,500+ Cycle Life & Maintenance-Free: Enjoy premium, set-and-forget reliability backed by an industry-leading 11-Year Manufacturer Warranty.
Recommended charging settings:
Batteries employed in non-Victron systems should utilize the following settings:
- Absorption voltage: 14.2V
- Absorption time of 15 minutes per battery
- Float voltage: 13.5V
- Equalization: Off
- No temperature compensation (Disabled)
To use the V2 Elite with Victron systems.
Set up the battery comm harness and gauge as follows:
- Plug with waterproof bung plugged into master blue port.
- RJ45 cable out of master black port and into slave1 blue port.
- RJ45 cable out of slave1 black port and into slave blue port and so on to daisy chain up to 16 batteries in parallel.
- Set dip switches as per manual.
- Plug in grey RJ45 plug into the Cerbo or Ekrano GX BMS CAN port or if you have the new Cerbo Mk2 plug grey plug inot VE-CAN1 or VE-CAN 2 and change the VE can port speed to 500 KBPS LV.
- To confirm proper reporting, go to the GX/touch screen and confirm the Epoch battery shows up on the device list. Click on the battery line, go to Details. Check to see the number of modules online is equal to the number of batteries installed. Check that the number of AH is equal to the number of AH installed.
- In the GX device/touch screen turn on DVCC, set controlling BMS to Epoch, set battery monitor to Epoch.
- The system should say External Control on the GX touch screen Inverter tile when charging (but not while inverting). The system will automatically cycle to 14.2V with an absorption time of a minimum of roughly 15 minutes per battery followed by 13.5V float voltage.
- It is recommended to manually program the Multiplus, Quattro and all other charge source to these same parameters in case of CAN communication loss.
| Type: | |
|---|---|
| Vendor: |