48V 30Ah Ryobi Electric Lawn Motor - Replacement Lithium Battery Kit
$1,099.00
$0.00( / )
Tax included.
Compatible with 48V RYOBI Electric lawn mowers (NOT FOR GOLF CARTS) LiFePO4 Chemistry 30Ah Capacity (100% depth of discharge, 2X that of lead acid they are replacing) 60A Max Continuous Discharge (100A 10S Discharge) 0 to 100% Charge in 2 hours with included 48V 15A Charger IP67 Rated, Dust and...
Categories:
- Compatible with 48V RYOBI Electric lawn mowers (NOT FOR GOLF CARTS)
- LiFePO4 Chemistry
- 30Ah Capacity (100% depth of discharge, 2X that of lead acid they are replacing)
- 60A Max Continuous Discharge (100A 10S Discharge)
- 0 to 100% Charge in 2 hours with included 48V 15A Charger
- IP67 Rated, Dust and WATERPROOF
- CAN Bus Communication allows battery modules to work in sync
- Built-in Smart Battery Management System (BMS)
- Over charge and over discharge protection
- Over current and short circuit protection
- High & low temperature disconnects
- 4000+ Cycle life & Maintenance-free
- 11 Year Manufacturer Warranty
Specification:
Configuration
Cell Configuration: 16S
Chemistry: LiFePO4
Current
Ah Capacity: 30Ah
Max Continuous Discharge Amps: 60A
Max Charge Current Amps: 30A
Max Discharge Peak Current Amps: 100A (10 Seconds)
Series | Parallel: Max (10) in Parallel = 300 Amp Hours
Voltage
Voltage: 51.2V Nominal
Max Charge Voltage: 57.6V
Operating Voltage Range: 40.0 - 57.6V
Temperature
Charge Temp Range: 0°C (32°F) / 55°C (131°F)
Discharge Temp Range: -20°C (-4°F) / 55°C (131°F)
Storage Temp: 0°C (32°F) / 30°C (86°F) (<6 Months)
Weight & Dimensions:
Weight: 33 (LBS)
Dimensions
Length: 10.25 (inches)
Width: 7 (inches)
Height: 11 (inches)
Additional Information:
M8 Terminals - Torque Tension Recommendation is 8-12N·M
Pack Certifications: UN38.3, CE
Cell Certifications: UL1642, UL2580, UN38.3
Recommended charging settings:
To properly charge your Epoch Batteries, you will want to verify that any charging component in your system is capable of being programmed for the following specifications. Charging components can include, but are not limited to converters, inverter chargers, solar charge controllers, DC to DC chargers, etc.
Bulk/Absorption: 14.2V – 14.6V
Absorption Time: Two batteries in parallel connections require 30 minutes 200Ah
Float: 13.4V – 13.8V
Equalization: 14.4V/ Disabled
Temperature Compensation: 0/Disabled
Charge Rate: 50% of the battery or battery bank capacity
Battery Charge Temperature Range: 32°F (0°C) to 131°F (55°C)
Battery Discharge Temperature Range: -4°F (-20°C) to 140°F (60°C)
Cell Charge Temperature: 32°F (0°C) to 131°F (55°C)
Cell Discharge Temperature: -4°F (-20°C) to 140°F (60°C)
NOTE: Not all chargers are capable of multistage charging. If yours is not, you will want to verify it can be programmed for the Bulk/Absorption voltage and have the other items mentioned disabled if applicable. Consult your charger's manual or the manufacturer.
| Type: | |
|---|---|
| Vendor: |